RC48C
The RC48C ground-fault ground-continuity monitor is used to monitor the residual current in high-resistance grounded installations. The maximum ground fault current in these installations is limited by a neutral grounding resistor to 5 A, 15 A or 25 A.
It is particularly suitable for trailing cable protection. Trailing cables are very susceptible to environmental damage and therefore they need special attention. This is where BENDER comes in.
The RC48C ground-fault ground-continuity monitor combines two functions in one device:
- Monitoring of the residual current and
- Monitoring the grounding conductor for low resistance, high resistance and shorted.
If a limiting value is exceeded, a relay with two voltage free changeover contacts will be activated. Alarm messages of the RC48C ground-fault ground-continuity monitor can also be displayed on a remote RI2000GC alarm indicator and operator panel.
The RC48C ground-fault ground-continuity monitor is used to monitor the residual current in high-resistance grounded installations. The maximum ground fault current in these installations is limited by a neutral grounding resistor to 5 A, 15 A or 25 A.
It is particularly suitable for trailing cable protection. Trailing cables are very susceptible to environmental damage and therefore they need special attention. This is where BENDER comes in.
The RC48C ground-fault ground-continuity monitor combines two functions in one device:
- Monitoring of the residual current and
- Monitoring the grounding conductor for low resistance, high resistance and shorted.
If a limiting value is exceeded, a relay with two voltage free changeover contacts will be activated. Alarm messages of the RC48C ground-fault ground-continuity monitor can also be displayed on a remote RI2000GC alarm indicator and operator panel.
Features
- Ground-fault monitor for high-resistance grounded installations with a limited fault current of 5…25 A
- Measures the residual current by means of a Bender residual current transformer
- Alarm easily recognizable by LED lights
- Alarm relay with two voltage free changeover contacts
- Alarm contact delayable by a selectable time
- Recognizes series resistance faults and cross resistance faults
- The alarm relay can be used for the tripping of a load switch
- Depending on the type of load switch the operating mode of the alarm relay can be set to N/O operation or N/C operation
Applications
- High-resistance grounded installations with a limited fault current of 5…25 A
- Mining applications
RC48C Variant(s)
| Type | Art. No. |
|---|---|
| RC48C-935 | B94013002 |
| RC48C-9935 | B94013012 |
| RC48C-9936 | B94013013 |
Optional Accessories for RC48C
| Type designation | Art.-No. |
|---|---|
| Termination device, P = 5 W | B94013008 |
| Termination device, P = 50 W | B94013009 |
| Termination device, P = 50 W | B94013006 |
| Termination device with integrated resistor, P = 50 W | B94013007 |
| Remote alarm indicator and operator panel | B94071000 |
| Residual current transformer, 70 mm | B911777 |
| Residual current transformer, 105 mm | B911778 |
Downloads for RC48C
| Name | Category | Size | Language | Timestamp | D-/B-Number |
|---|---|---|---|---|---|
| UKCA - RC48 | CE Declarations of Conformity | 121.6 KB | 2024/04/2626.04.2024 | ||
| RC48C | Manuals | 606.6 KB | EN | 2024/03/0101.03.2024 | D00318 |
| RC48 | CE Declarations of Conformity | 87.5 KB | 2024/04/2626.04.2024 | ||
| RC48C | Manuals | 722.4 KB | EN | 2020/02/2626.02.2020 |